ch_client = “kb123″; ch_width = 300; ch_height = 250; ch_type = “mpu”; ch_sid = “Chitika Default”; ch_backfill = 1; ch_color_site_link = “#0000CC”; ch_color_title = “#0000CC”; ch_color_border = “#FFFFFF”; ch_color_text = “#000000″; ch_color_bg = “#FFFFFF”; Thermionic Emission A thermionic energy converter is a device consisting of two electrodes placed near one another in a vacuum. One [...]
Static Electricity Atoms with the proper number of electrons in orbit around them are in a neutral state, or have a “zero charge.” A body of matter consisting of these atoms will neither attract nor repel other matter that is in its vicinity. If electrons are removed from the atoms in this body of matter, [...]
Conductors Conductors are materials with electrons that are loosely bound to their atoms, or materials that permit free motion of a large number of electrons. Atoms with only one valence electron, such as copper, silver, and gold, are examples of good conductors. Most metals are good conductors. Insulators Insulators, or nonconductors, are materials with electrons [...]
Free Electrons Electrons are in rapid motion around the nucleus. While the electrostatic force is trying to pull the nucleus and the electron together, the electron is in motion and trying to pull away. These two effects balance, keeping the electron in orbit. The electrons in an atom exist in different energy levels. The energy [...]
The Atom Elements are the basic building blocks of all matter. The atom is the smallest particle to which an element can be reduced while still keeping the properties of that element. An atom consists of a positively charged nucleus surrounded by negatively charged electrons, so that the atom as a whole is electrically neutral. [...]
The pulsed operation of the gas-filled detector illustrates the principles of basic radiation detection. Gases are used in radiation detectors since their ionized particles can travel more freely than those of a liquid or a solid. Typical gases used in detectors are argon and helium, although boron-triflouride is utilized when the detector is to be [...]
A proportional counter is a detector which operates in the proportional region, as shown in Figure 6. Figure 7 illustrates a simplified proportional counter circuit. To be able to detect a single particle, the number of ions produced must be increased. As voltage is increased into the proportional region, the primary ions acquire enough energy [...]
Ionization chambers are electrical devices that detect radiation when the voltage is adjusted so that the conditions correspond to the ionization region (refer to Region II of Figure 6). The charge obtained is the result of collecting the ions produced by radiation. This charge will depend on the type of radiation being detected. Ionization chambers [...]
The Geiger-Müller or G-M detector is a radiation detector that operates in Region V, or G-M region, as shown on Figure 23. G-M detectors produce larger pulses than other types of detectors. However, discrimination is not possible, since the pulse height is independent of the type of radiation. Counting systems that use G-M detectors are [...]
[Online Article is proudly powered by WordPress.]